MASTOREMATA D.I.Y. SHOP - ONLINE | PLASTIC METAL / POLYESTER PUTTY 400GR Σιδηρόστοκος 2 συστατικών
printerFriendly by cloudcms®
PLASTIC METAL / POLYESTER PUTTY 400GR 2 component polyester putty
PLASTIC METAL is high quality two component polyester putty suitable for filling large imperfections and gaps with one coat application. It gives exceptional adhesion, easy application and sanding. It dries fast, without cracking even in thick layers. It is resistant to water, petrol, alkalic solutions and acids
ADVANTAGES
- Excellent bonding strength
- Perfect finish
- Easy sanding
- Does not shrink
- Excellent resistance to ageing
- Excellent resistance to water
- Excellent resistance to solvents, alkalis, and acids
- Excellent temperature resistance
- Interior and exterior use
APPLICATIONS
- Ideal for repairs on metallic, wooden, plastic, stone, marble surfaces.
- Automobile, boat, wagon and house repairs
INSTRUCTIONS FOR USE
- Surfaces must be dry and clean from dust, grease and rust.
- Mix putty with 2-3% hardener
- The putty is ready for use. The putty remains workable for 3-6 minutes. Drying time is 5-10 minutes.
- Finished surfaces may be sanded after 20-30 min using sandpaper No 80-120.
- Carefully remove any excess material with a sharp knife before completely set.
It is advisable to perform a suitability test for each application.
REMARKS
- Do not exceed the mixing ratio of 3% especially at high temperatures since this will accelerate curing.
- Place the caps correctly after use and close tight.
Coverage: 1 - 2 m2/Kg
Thinning: no
Application: by knife
Touch dry: 5 - 10 minutes 20oC
Hard dry: 20 - 30 minutes 20oC
Exterior use
Interior use
Application temperature: 10oC - 35oC
Cleaning: with nitro solvent
Safety Data sheet
Code: SHJ90200027
Price: €4.80
(including 19% VAT)
