MASTOREMATA D.I.Y. SHOP - ONLINE | ISOCRYL WALL 10 ΛΙΤΡΑ MERCOLA ΛΕΥΚΟ (Ελαστομερές στεγανωτικό χρώμα καθέτων επιφανειών καθαρής ακρυλικής βάσης)
printerFriendly by cloudcms®
Code: SHJ90500131
Price: €79.95
(including 19% VAT)
ISOCRYL WALL 10 LITER MERCOLA (Highly elastic pure acrylic wall and facade insulation paint)
WALL ISOCRYL is a high quality elastic, waterbased, waterproofing paint based on pure acrylic resins, with excellent properties against all weather conditions. It is suitable for waterproofing old and new walls and facades. It forms an elastic membrane that protects the surface from humidity as well as high temperatures.
ADVANTAGES
- Weatherproofing exterior walls and surfaces
- Elastic, seamless membrane without joints
- Superior adhesion on most building surfaces
- Excellent coverage
- Excellent water/humidity resistance
- Vapour permeability, permitting structure breathing
- Protects surfaces from carbonization and chalking
- Excellent resistance to ageing and UV rays
- Most suitable for buildings close to the seaside
- May be tinted with most common tinting systems
- Waterbased - user and environmentally friendly – inflammable – easy clean
APPLICATIONS
- Waterproofing old and new walls and facades
- Waterproofing and protection from UV rays of bitumen and polyurethane hard foam surfaces
- Suitable for concrete surfaces, plaster, wood, stone, brickwork, gypsum boards, cement boards, bituminous materials polyurethane etc.
Substrate preparation
- Surfaces must be dry and clean from grease, dust and loose materials.
- Cracks and joints must be filled all with elastomeric acrylic filler FLEX, acrylic sealant MEGACRYL, or polyurethane sealant BONDFLEX 390 FC.
- Imperfections on plaster must be repaired with ISOMIX REPAIR PLASTER RP 300
- Prime surfaces with solvent based primer ISOCRYL PRIMER DUR, or waterbased primer ISOCRYL PRIMER DUR AQUA for strengthening loose parts and protection from carbonization and chalking. Allow drying for 1 – 2 hours depending on ambient temperature.
Application
- Apply one coat of WALL ISOCRYL diluted 10%-20% with clean water, using a brush, roller or airless spray gun. Allow drying for 12hours.
- Apply a second layer of WALL ISOCRYL diluted 5 - 10% with clean water.
- For extra protection, or where required, a third layer may be applied.
- For best results, the temperature during application and curing should be between 10oC -35oC. Application must be avoided when rain or frost is expected.
 |  |  |  |
|
Coverage: 10 - 12 m2/Lt |
Thinning: 10 - 20% with clean water |
Application: by brush |
Application: by roller |
 |
 |
 |
 |
|
Application: by spray gun |
Touch dry: 1 - 2 hours 20oC |
Hard dry: 12 hours 20oC |
Exterior use |
 |
 |
||
|
Application temperature: 10oC - 35oC |
Cleaning: with water |
Code: SHJ90500131
Price: €79.95
(including 19% VAT)
Menu