ISOMIX RESIN SBR 400 is a new nanotechnology concentrated reinforcing latex and admixture. It is based on pure synthetic resins and nano – microtechnology particles. It is ideal for the improvement of the adhesion, waterproofing, flexibility and workability of cement admixtures, plasters etc.

ADVANTAGES

• New nano –micro technology
• Strong adhesion to old and new concrete, steel, wood and usual building surfaces.
• Waterproofing of cement admixtures
• Crack prevention
• Diminished shrinkage during drying of cement admixtures
• Improved frost resistance
• Improved mechanical properties
• Improved water, oil and chemical resistance
• High impact and wear resistance
• High elasticity (at high resin addition)
• Improved workability with concurrent water content
• Does not require antifoam

APPLICATIONS

• Improvement of the characteristics offered by treated cement admixtures, screeds, self-leveling screeds, plasters, waterproofing slurries etc. The improved mechanical properties make it a suitable product for pre-constructed concrete elements.
• Improvement of adhesion in mortars and as a primer.
• Improvement of adhesion between old and new concrete and screeds - mortars
• Priming and fortification of absorbing and deteriorated building surfaces
• Improvement of waterproofing, adhesion and elasticity in tiling adhesives and grouts.
• Improvement of adhesion, mechanical and waterproofing properties of plasters and cementitious admixtures

SURFACE PREPARATION

• Make sure that surfaces are clean and free of oily residues, loose materials, dust etc prior to application.
• Pre -wet very hot or very absorptive surfaces avoiding the creation of water puddles.

MIXING

ISOMIX RESIN SBR 400 is added in the recommended ratios to the mixing water in admixtures :

FLOORING SCREEDS

• Cement : sand = 1:1 to 1:4
• ISOMIX RESIN SBR 400 : WATER = 1:1
• drymix : liquid mix = 5:1

BRUSHABLE SLURRIES

• ISOMIX RESIN SBR 400 : WATER = 1:3

PRIMING LAYERS BETWEEN OLD AND NEW CONCRETE

• Cement : sand = 1:1
• ISOMIX RESIN SBR 400 : WATER = 1:1
• cement admixtures : liquid mix = 2:1
  Applied by brush 20 minutes prior to applying new concrete or screed

TILE – MARBLE ADHESIVES AND GROUTS

• ISOMIX RESIN SBR 400 : WATER = 1:2 TO 1:3

SCREEDS

• ISOMIX RESIN SBR 400 : WATER = 1:3

PLASTER WATERPROOFING

• ISOMIX RESIN SBR 400 : WATER = 1:3 TO 1:4

SURFACE PRIMING

• No dilution

WARNING

Shake well before use

Thinning: acording to application	Exterior use	Interior use	Application temperature: 10oC - 35oC
Cleaning: with water