CONCRETE SEALER is a high quality transparent, pure acrylic, sealer for stamped concrete and cementitious floors and artificial building materials. It has excellent penetrating capacity and UV resistance. It protects surfaces from humidity and stains. It offers significant strengthening and scrub resistance providing dust free surfaces. Depending on the number of coats applied creates a film, which protects and enhances the appearance of the artificial surfaces for decorative purposes. It is suitable for interior and exterior use.

Colour: Clear

ADVANTAGES

• Excellent finishing - enhances the natural beauty of surfaces
• Excellent penetration
• Excellent water repellence
• Excellent scrub resistance – dust-free surfaces
• Long lasting protection from stains, rain, humidity, fungi, mould etc.
• Resistance to temperature variations
• Excellent UV resistance
• Easy to apply – ready to use material
• Interior and exterior use

APPLICATIONS

• Protection and decoration of porous surfaces such as stamp concrete floors, artificial stones, cementitious and industrial floors and paving stones, bricks, artificial building materials, cement, decorative gypsum elements, concrete etc.
• Strengthening of loose or deteriorated substrates.

Substrate preparation

1. Surfaces must be dry and clean from dust unstable material, oil and rust.
2. New surfaces must be cleaned with wet sponge prior to application.
3. Old stained surfaces must be cleaned with OXY CLEAN CL 17 prior to application. Pressure clean surfaces if needed to remove dirt and use OXY CLEAN CL 17 for stagnant stains.
4. Surfaces must be completely dry prior to application.

Application

1. Stir material thoroughly before and during application.
2. Apply CONCRETE SEALER with a brush, roller or spray gun. Special attention must be given for even application.
3. When applied on very porous substrates a second coat is recommended. Allow at least 3 - 4 hours for drying between the two coats.
4. Windows, doors, plants etc must be carefully covered prior to application.
5. CONCRETE SEALER when dry is not harmful for humans and the environment.

REMARKS

Due to the wide variety of substrates and environmental conditions, a compatibility test is recommended in an inconspicuous spot prior to full scale application.

Coverage: 8 - 10 m2/Lt	Thinning: 10%-20% with nitro solvent or spray gun solvent.	Application: by brush	Application: by roller
Application: by spray gun	Touch dry: 30 - 45 minutes 20oC	Hard dry: 6 hours 20oC	Exterior use
Interior use	Application temperature: 10oC - 35oC	Cleaning: with nitro solvent or spray gun solvent