SURFACE PREPARATION
Make sure that the wooden surface is dry, free from dust, grease, dirt, resins and poorly adhesive materials and it should be thoroughly sanded by a suitable abrasive paper. In order to protect new wooden surfaces apply 1 or 2 coats of colorless or colored wood impregnated alpicare and then apply 2-3 coats of alpiwood. When wooden surfaces are in poor condition, remove all paints or vanishes completely with nitro thinner and then dust down and apply 2-3 coats of alpiwood.
APPLICATION
Stir thoroughly before use and occasionally during application. Apply with brush, roller, or spray gun in 2-3 coats of alpiwood. If needed, dilute 5-10% with water depending on the preferable workability.Do not apply when air and surface temperatures are below 5o C, above 40o C and /or humidity level is above 80%. Touch dry after 45-60 minutes. Recoat after 2-3 hours. Under cooler or humid conditions, allow longer times.
COVERAGE Approximately, 14-16 m2/lt, depending on the surface texture and the method of application
The final color may be different from the color card, depending on the type and porosity of the wood, and the number of layers and the way of painting.