SURFACE PREPARATION
Make sure that the wooden surface is dry, free from dust, grease, dirt, resins and poorly adhesive materials and it should be thoroughly sanded by a suitable abrasive paper. In order to protect new wooden surfaces apply 1 or 2 coats of colorless or colored wood impregnated alpicare and then apply 2-3 coats of alpiwood. When wooden surfaces are in poor condition, remove all paints or vanishes completely with nitro thinner and then dust down and apply 2-3 coats of alpiwood.
APPLICATION
Stir thoroughly before use and occasionally during application. Apply with brush, roller, or spray gun in 2-3 coats of alpiwood. If needed, dilute 5-10% with water depending on the preferable workability.Do not apply when air and surface temperatures are below 5o C, above 40o C and /or humidity level is above 80%. Touch dry after 45-60 minutes. Recoat after 2-3 hours. Under cooler or humid conditions, allow longer times.
COVERAGE Approximately, 14-16 m2/lt, depending on the surface texture and the method of application