ALPICARE 750ML water-based impregnation wood coating (transparent)
SURFACE PREPERATION
Surfaces should be clean, dry and free from dustand any loose materials and thoroughly sanded by a suitable abrasive paper. In order to protect new wooden surfaces apply 1-2 coats of colorless or colored wood impregnated alpicare. When wooden surfaces are in poor condition, remove all paints or vanishes completely with nitro thinner and then dust down and apply 2-3 coats of alpicare.
APPLICATION
Stir thoroughly before use and occasionally during application. Applied in 1-3 layers with brush, roller or spray. For complete protection, especially for wood surfaces in exterior areas, use of alpiwood water base varnish is recommended. Clean tools immedialty after use! Use water and, if necessary, use soap or detergents. Do not apply when air and surface temperatures are below 5o C, above 40o C and /or humidity level is above 80%.
THINNING: The product is ready to use.
DRYING-RECOATING: Touch dry in about 30 minutes. Recoat after 1-2 hours, depending on environment conditions.
COVERAGE
Approximately 12-14 m2/lt, depending on the surface texture and the method of application.
